Screw, Corrosion Resistant Steel

This is a corrosion resistant steel button head screw with machine threads, hex recess and is RoHS/REACH compliant. The screw head is colored with a thermosetting coating. 

Please see the data sheet for more information and size options.

Category:

Additional information

Material

Head Type

Thread Type

Recess Type

Plating/Finish

RoHS/REACH Compliance

Description

This is a corrosion resistant steel button head screw with machine threads, hex recess and is RoHS/REACH compliant. The screw head is colored with a thermosetting coating. 

Please see detailed specifications for more information and size options.

Request Quote

Detailed Specifications

View the data sheet

FEATURES:
1. Screws are furnished with pre-colored heads to match panels and equipment. The coating material used in combination with the relatively hard screw heads is resistant to abrasion and screwdriver damage. This feature virtually eliminates the need for touch-up painting after assembly.
2. The thermosetting coating material is both abrasion and solvent resistant. Screw heads are cleaned and prepared for maximum adhesion of the coating material.
3. Screw heads are formed by cold forging, followed by a heat treating process which increases the basic tensile strength of the material. The resultant high tensile strength thus eliminates burring and yield of the substrate under the coating material.

NOTES:
1. The screws listed in this series reflect high quality with emphasis on the forming of the hexagon socket to meet design specification.
2. Care should be exercised to assure that the screwdriver tools meet the same quality and design specification in order to eliminate mismating and subsequent damage to the drive recess and coating material.
3. The thread diameters and lengths listed in the table are industry standard sizes. Inventory levels of these sizes may vary at any one time due to customer demands and lead time necessary for production. Lengths not listed are also available on order.

SPECIFICATIONS:
1. Screws are in accordance with ANSI/ASME Standard No. B18.3, Socket Button Head Cap Screws.
2. Screws are 300 series corrosion resistant steel and are stocked passivated per SAE-AMS-2700.
3. Threads are in conformance with H-28 Federal Handbook for threads.
4. Coating colors are matched to customer requirements. We recommend selection from FED-STD-595 whenever possible but we are also prepared to match customer-furnished color chips or samples.